RIDGID's new line of locating equipment meets the most demanding needs of the locating professional. Built to make even difficult locates easy, SeekTech is the only line locator that uses omni-directional antennas, guidance arrows and an easy to read mapping display to lead you quickly and accurately to the target line.
The antennas power the large mapping display which provides a..
SeekTech Receivers with their large display give you the information you need when you need it to locate more with greater certainty.
The Mapping Display confirms a good locate signal and identifies distortion in congested areas using:
Target Line – Guides the operator down the line and shows changes in direction.
Left-Right Guidance Arrows – Points the operator to the target..
Direct Connect using attached Clips
Induction from optional Inductive Signal Clamp
Induction from the Transmsitter Coils
Frequencies 1kHz, 8kHz, 33kHz
Output Power 5 Watts, Nominal
Output Any 2 Frequencies
Weight 2.4 lbs.
Maximum Open Circuit Voltage 240VAC 50/60Hz
Power Source 6-C Size Batteries
Model # 21898
Distance: Induce over 8 times more current than the competition onto a target line. More current means that you can walk and trace further than ever before.
Versatility: Induces at 8 kHz and 33 kHz for low distortion locates. In direct connect mode, the SeekTech ST-33Q can transmit at any frequency between 10 Hz and 490,000 Hz making the RIDGID SeekTech ST-33Q one transmitter ..
The RIDGID Inductive clamp allows users to apply a signal to a cable or pipe when connecting directly to the target conductor is not possible.
The clamp couples the transmitting signal onto the conductor which then allows users to locate using a compatible receiver, such as the NaviTrack™ or NaviTrack Scout™.
Two built in LED’s inform the user the..