Greenlee


Greenlee 10443 Fish Pole 24 Foot
  Specifications: Application : For Pushing And Pulling WiresOver Long Distances Collapsed Length : 50.000 IN (1270.000 MM) Diameter : 2-1/4 IN (57.000 MM) Extended Length : 24.000 FT (7.310 MR) Replacement Part : 10453 Replacement Hook Type : Non Conductive Weight : 4-1/4 LB (1.900 KG) Description: Designed specifically for pushing and pulling wires o..
$109.94 $159.57
Greenlee 2001 Cable Puller
Greenlee 2001 Cable Puller ..
$1,776.25 $3,548.00
Greenlee 7606SB Slug-Buster Ram and Foot Pump Hydraulic Driver Kit
  Key Features Driver, foot pump, slug-buster punches, dies and draw studs for 1/2-Inch through 2-Inch conduit, steel case Foot operation frees both hands to position punch Punches 10 times faster than wrench method Will also drive 751 cable cutter head Powerful 11-Ton hydraulic ram ..
$1,522.94 $2,506.89
Greenlee 7905SBSP Speed Punch Kit
Description:   SPEED PUNCH™ saves time and money with every hole. Up to 3X's faster setup and disassembly. "No-Thread" punch designeliminates cross-threading. Available in 3/4" - 2" conduit sizes and punch kits Specifications:   Application : For punching conduit sized holes in mild steel, aluminum, fiberglass, and plastic. ..
$387.92 $574.70
Greenlee 7906SBSP Knockout Speed Punch Set
Description: SPEED PUNCH™ saves time and money with every hole. Up to 3X's faster setup and disassembly. "No-Thread" punch designeliminates cross-threading. Available in 3/4" - 2" conduit sizes and punch kits" Specifications: Application : For punching conduit sized holes in mild steel, aluminum, fiberglass, and plastic. Capacity : Mild steel up through 10 gauge (3.5 mm). Diameter : A..
$1,026.20 $1,689.22
Greenlee 854 Quad Bender Electric Conduit Benders Quad Bender Electric
      Description: Bends 1/2' to 2' EMT, IMC, Rigid and Rigid Aluminum conduit Without any shoe changes. No loose parts to get lost. Two operating positions; tabletop and upright. Remote pendant switch and bending data charts for easy, accurate bends. Simple setup and easy operation. Squeeze adjustment to compensate for variations in EMT conduit. Adjustable leveler pads...
$8,181.16 $10,488.66
Greenlee 15363 Hook Sheave Unit Assy, Pulling 18"
Strong, welded steel frames. Forged steel closure type hooks with 1' (25.4 mm) opening. 5' (127 mm) wide aluminum alloy sheaves with self-lubricating bearings. Select a sheave with a maximum rated capacity that meets or exceeds the cable puller's maximum pulling force. ..
$570.58 $652.09
Greenlee 542-150 150' x 3/16" Fiberglass Fish Tape in Reel Stand
  Greenlee 542-150 Specifications:   Width: 3/16" (4.7 mm)   Length: 150' (45.7 m)    Capacity: 400 lbs. (1.7 kN) maximum design strength   Greenlee 542-150 Features:   12" (305 mm) case has high-impact nylon, one-piece handle for maximum durability, long life, and easy, comfortable use.    Non-conductiv..
$441.29 $622.64
Greenlee 542-200 200' x 3/16" Fiberglass Fish Tape in Reel Stand
  Greenlee 542-200 Specifications:   Width: 3/16" (4.7 mm)   Length: 200' (76.2 m)    Capacity: 400 lbs. (1.7 kN) maximum design strength   Greenlee 542-200 Features:   12" (305 mm) case has high-impact nylon, one-piece handle for maximum durability, long life, and easy, comfortable use.    Non-conductiv..
$514.85 $726.41
Greenlee 542-250 250' x 3/16" Fiberglass Fish Tape in Reel Stand
  Greenlee 542-250 Specifications:   Width: 3/16"    Length: 250'    Capacity: 400 lbs. (1.7 kN) maximum design strength   Greenlee 542-250 Features:   12" (305 mm) case has high-impact nylon, one-piece handle for maximum durability, long life, and easy, comfortable use.    Non-conductive fiberglass..
$588.39 $830.18
Greenlee 555CX Electric Conduit Bender with Standard Pendant
  FEATURES:   • Most cost effective non-programmable bender - only need 2 shoes instead of 7 to bend all ½ - 2" EMT, IMC, Steel Rigid, Aluminum Rigid, Stainless Steel Rigid and PVC Coated Steel Rigid conduits. • Fully backwards compatible with existing shoes. • Same core frame and core control advantages found on the 855GX. • 555DX has absolute encoder to provide ease for repeated ..
$3,806.80 $5,537.17
Greenlee 555DX Electric Conduit Bender with Digital Angle Pendant
  FEATURES:   • Most cost effective non-programmable bender - only need 2 shoes instead of 7 to bend all ½ - 2" EMT, IMC, Steel Rigid, Aluminum Rigid, Stainless Steel Rigid and PVC Coated Steel Rigid conduits. • Fully backwards compatible with existing shoes (shoes are not included). • Same core frame and core control advantages found on the 855GX. • 555DX has absolute encoder to p..
$4,269.20 $6,209.75
Greenlee 6001 Super Tugger Cable Puller Power Unit - 6500 lbs.
  Please contact us for a freight quote   Greenlee 6001 Specifications:  Pulling Force - Maximum: 6,500 lbs. (28.9 kN)  Pulling Force - Continuous: 4,500 lbs. (20 kN)  Dimensions: L 20-3/4" (527 mm) x W 22-1/2" (572 mm) x H 12" (305 mm)  Pulling Speed No Load: 16.5 fpm (5 mpm)  Pulling Speed At 2000 lbs. (8.8 kN): 11 fp..
$5,485.91 $6,751.90
Greenlee 6004 Super Tugger Complete Puller Package 6500 lb.
  Please contact us for a freight quote   Greenlee 6004 Specifications: Pulling Force Maximum: 6,500 lbs. (28.9 kN) Continuous: 4,500 lbs. (20 kN) Dimensions Length: 20-3/4" (527 mm) Width: 22-1/2" (572 mm) Height: 12" (305 mm) Pulling Speed - Feet (Meters) Per Minute No Load: 16.5 (5) At 2000 lbs.: (8.8 kN) - 11 (3.4) At 4000 lbs.: (17..
$8,689.27 $11,140.10
Greenlee 6005 Super Tugger Complete Puller Package - 6500 lbs.
  Please contact us for a freight quote   Greenlee 6005 Specifications: Pulling Force Maximum: 6,500 lbs. (28.9 kN) Continuous: 4,500 lbs. (20 kN) Dimensions Length: 20-3/4" (527 mm) Width: 22-1/2" (572 mm) Height: 12" (305 mm) Pulling Speed - Feet (Meters) Per Minute No Load: 16.5 (5) At 2000 lbs.: (8.8 kN) - 11 (3.4) At 4000 lbs.: (17.9 kN) - 7.5 (2.3) At 6000 lbs.: (26.7 k..
$10,123.63 $12,979.01
Greenlee 6806 UT8 Package with Mobile VersiBoom II
  Please contact us for a freight quote   Features: Pulls up to 8,000 lbs. (35.8 kN)  Direct gear drive Portable Boom lift using a hand crank provides ultimate safety to lift heavy loads. Quick set-up with quick disconnect system to adjust the nose or elbow piece 360 degrees. Swivel casters move easily on rough terrain on the construction site. H..
$8,951.42 $11,476.19
Greenlee 6906 UT10-2S Package with Mobile VersiBoom II
  Please contact us for a freight quote   Description: • 2-Speed motor that delivers the fastest pulling time for all pulling needs over the widest (10,000 lbs.) range • Strong, rugged motor designed specifically for both big and small cable pulling applications up to 10,000 lbs. • Easy control features for increased productivity • On-board force gauge..
$9,919.97 $12,717.91
Greenlee 7306 Ram and Hand Pump Hydraulic Driver Kit
  Greenlee 7306 Includes: • Driver • Hand pump • Standard punches • Dies and draw studs for 1/2" through 2" conduit • Plastic case • 1 each of the following: 721-1/2, 14722, 123AV, 124AV, 125AV, 126AV, 127AV, 128AV, 439AV, 440AV, 441AV, 442AV, 746, 2113AA, 1557AA, 1924AA, 1925AA, 1926AA, 34410, 767, 06302, 30206 • 2 each of the fo..
$1,032.34 $1,699.32
Greenlee 7625 Slug-Buster Ram and Foot Pump Hydraulic Driver Kit
  Greenlee 7625 Includes: 2113AA Draw Stud - 3/4" x 5-3/8" 54167 Female Coupler - 1/4" 54168 Dust Plug 1557AA Punch Sleeve 1614SS Draw Stud - 3/8" x 2-13/16" - Qty. 2 1924AA Spacer-short 1925AA Spacer-medium 1926AA Spacer-long 34410 Kwik Stepper Step Bit - 1/2" 1725 Hydraulic Foot Pump (includes 54167 female coupler and 54168 dust plug) 37729 High pressure hose unit - 1/4" x 10'..
$1,338.46 $2,203.22
Greenlee 7706SB Standard Quick Draw Flex Driver Kit
  Greenlee 7706SB Specifications: • 721-1/2 1/2" Conduit Size Punch, Hole Size: 7/8" • 14722 1/2" Conduit Size Die, Hole Size: 7/8" • 721-3/4 3/4" Conduit Size Punch, Hole Size: 1.115" • 124AV 3/4" Conduit Size Die, Hole Size: 1.115" • 721-1 1" Conduit Size Punch, Hole Size: 1.362" • 126AV 1" Conduit Size Die, Hole Size: 1.362" • 721-1-1/4 1-1/4" Conduit Size Punch, Hole Size: 1.701" ..
$1,064.94 $1,752.99
Greenlee 855GX Programmable Electric Conduit Bender
      Description:  Profitability via Productivity, programmability and portability.  Save time by eliminating bending calculations via the easy to use LCD interface to program 7 different bends with ability to save 3 locally or unlimited number to USB memory stick for recall later or to transfer to another 855GX bender.  Avoid scrap and speed bending with the..
$11,170.12 $14,320.66
Greenlee FP18 18' Fish Pole
  Greenlee FP18 Specifications:  Diameter: 2"   Material: Fiberglass   Color: Green   Extended Length: 18'  Collapsed Length: 27"  Greenlee FP18 Features:  Push or pull wires over long distances including suspended ceilings, sub-floors, crawl spaces and attics.   Non-conductive, high..
$93.79 $119.10
Greenlee MVB Mobile VersiBoom
  Please contact us for a freight quote   FEATURES:  Puller Assembly NOT Included  Set-up in less than 2 minutes  Boom lift using a hand crank provides ultimate safety to lift heavy loads.  Quick set-up with quick disconnect system to adjust the nose or elbow piece 360 degrees.   Conduit adapter available for 2” – 5&r..
$4,482.54 $5,516.97
Greenlee UT2 Ultra Tugger Cable Puller 2 -2000lb Cable Pulling Machine
  Greenlee UT2 Specifications: • 3 x 500 kcmil cable 500’ with 2 x 90° bends • 3 x 500 kcmil cable 250’ with 4 x 90° bends • 8 x 4/0 AWG cable 300’ with 3 x 90° bends   Greenlee UT2 Includes: • 2,000 LB. Cable Puller Unit   Greenlee UT2 Features: • With a long history in designing innovative cable pullers for the electrical contractor, Greenlee has done it once again. • T..
$2,888.92 $3,301.63
Greenlee 00865 Floor Mount for 6500, 6800 Cable Pullers
Features: For 6800 Series Ultra Tugger 8 Cable Pullers and 6500 Series Ultra Tugger 5 Cable Pullers Floor Mount for 6500, 6800 Cable Pullers ..
$434.98 $497.12
Greenlee 04613 Slug-Splitter Standard Knockout Die 2-1/2-Inch
  Key Features Punches up to 10 gauge stainless steel Punch and draw stud are required for operation For use with Greenlee punch 04614 and draw studs 29452 or 12099 Can be used with Greenlee ratchet driver 1904 or hydraulic drivers 7646 and 7630 Unique punch profile also splits slugs for easier slug removal ..
$77.10 $114.23
Greenlee 04614 Slug-Splitter Standard Knockout Punch 2-1/2-Inch
  Key Features Punches up to 10 gauge stainless steel Die and draw stud are required for operation For use with Greenlee die 04613 and draw studs 29452 or 12099 Can be used with Greenlee ratchet driver 1904 or hydraulic drivers 7646 and 7630 Unique punch profile also splits slugs for easier slug removal ..
$254.69 $377.31
Greenlee 1 1/4" Conduit-Size Slug-Buster Knockout Punch Unit
Features: The contractor’s choice – worldwide. Unique punch profile splits slugs allowing easy slug removal. Use with battery-powered, hydraulic, ratchet or manual drivers. Uses standard Greenlee dies and draw studs. Slug Buster Punches available in sizes up thru 2.52" (64.0 mm). Capacity: Mild steel up through 10 gauge (3.5 mm). Application: Punch mild steel, aluminum, fiberglass and pla..
$67.64 $100.20
Greenlee 1/2" Conduit-Size Slug-Buster Knockout Punch Unit
Features: The contractor’s choice – worldwide. Unique punch profile splits slugs allowing easy slug removal. Use with battery-powered, hydraulic, ratchet or manual drivers. Uses standard Greenlee dies and draw studs. Slug Buster Punches available in sizes up thru 2.52" (64.0 mm). Capacity: Mild steel up through 10 gauge (3.5 mm). Application: Punch m..
$38.01 $56.31
Greenlee 1/2" through 2" PVC Shoe Group for Bender Serial Code ABL
Features: Used for Bending 1/2", 3/4", 1", 1-1/4", 1-1/2" and 2" PVC Coated Conduit. Used on the Greenlee 854 (03106) Quad Bender and the Greenlee 855 (08550)  Specifications: Capacity: 1/2" - 2" 40 MIL PVC Coated Rigid Includes: 1/2" through 2" PVC Coated Rigid Shoe Group ..
$2,336.25 $3,398.19
Greenlee 1/2" Thru 2" Rigid Shoe Group for Model 555 Bender
Features: Model 555 Accessory Shoe Groups Consists of one each: # 9: 1/2" thru 1-1/4" Rigid / IMC Bending Shoe #10: 1/2" thru 1-1/4" Support Roller #11: 1-1/2" thru 2" Rigid Bending Shoe #12: 1-1/2" thru 2" Support Roller ..
$1,430.51 $2,080.75
Greenlee 1/2" to 2" EMT Shoe Group for 555 Series Conduit Bender
This item includes shipping anywhere in the continental US.  Please note, this item is not available for overseas purchase.  If you would like to arrange for store pickup or alternate shipping please call us at 800-876-2325.    Features: For use with the 555 Series Deluxe Electric Conduit Benders and the 555C Series Classic Electric Conduit Benders. To bend IMC C..
$1,957.84 $2,847.77
Greenlee 1/2"-6" Electric PVC Heater/Bender (Non-Motorized)
This item includes shipping anywhere in the continental US.  Please note, this item is not available for overseas purchase.  If you would like to arrange for store pickup or alternate shipping please call us at 800-876-2325.    Features: Easy to use: preheat for 10 minutes, open lid and position PVC, close lid, rotate until pliable, open lid, remove PVC and form bend..
$1,420.30 $2,003.96
Greenlee 1531 Welder's Storage Box 15" x 31" x 18"
Features: Protects small tools and supplies. Single lock hasp for use with padlock. Compact side handles for easy portability. Heavy-duty hinges, plus chain connector to hold lid in open position. Capacity: 4.5 cubic feet Height: 15" Width: 31" Depth: 18" ..
$227.31 $360.81
Greenlee 1636 Storage Chest, 36-Inch By 17-Inch By 19-Inch
Description: Greenlee storage chests have recessed and concealed lock protectors for maximum security against drilling and cutting locks. (Model 1332 one lock protector only.) Enhanced lid bolster for added support and durability. Finger-groove lid handle for easy opening. Steel support arms to hold lid the in open position. Heavy-duty piano hinges with non-removable pin. Patented, ergonomical..
$324.45 $515.00
Greenlee 1732 Portable C-Frame Punch Driver Set 1/2" - 4" Conduit Size
Features: Fast, one-shot punching, no predrilling of pilot holes. Use with 1/2" through 4" conduit size and other round sizes only.  Use with Greenlee standard round punches and dies (optional). Throat measures 8" (203 mm) deep. Capacity - Up through 10 gauge (3.0 mm) mild steel with Greenlee Standard punches and dies; 1/2" through 4" conduit an..
$2,907.40 $4,307.26
Greenlee 17979 Support Unit ASSY,1/2 1-1/4 Rig
Description: Greenlee/17979 Support Unit Assy1/2 1-1/4 Rig We have these in stock and can generally ship the next business day. ..
$362.96 $414.81
Greenlee 17984 1-1/2" - 2" Support Roller for Rigid Conduit
Description: 1-1/2" - 2" Support Roller for Rigid Conduit We have these in stock and can generally ship the next business day. ..
$311.42 $355.91
Greenlee 17986 1/2" - 1-1/4" Support Roller for EMT
Description: 1/2" - 1-1/4" Support Roller for EMT We have these in stock and can generally ship the next business day. ..
$241.14 $275.59
Greenlee 1904 Slug-Buster Ratchet Punch Driver Kit
  Time-saving ball bearing head punches faster than wrench method Requires less than half the force of conventional ratchet drivers Punches up through 10 gauge (3.5 mm) mild steel with Greenlee Standard and Slug-Busterpunches and 16 gauge (1.5 mm) stainless steel with Greenlee Slug-Splitter SC punches Ratchet action allows for use in confined areas Unique design eli..
$876.76 $1,298.90
Greenlee 2 1/2" Conduit Size Standard Round Knockout Die
  Greenlee 1430AV Specifications: • 2-1/2" Conduit Size (Hole size is 2-7/8") Standard Round Knockout Die    Greenlee 1430AV Features: • This item is the die only. • For use in 2-1/2" - 4" Conduit Size Manual Round Standard Knockout Punch Kit 7304. ..
$66.24 $98.13
Greenlee 2 1/2" Conduit Size Standard Round Knockout Punch
Features: This item is the punch only.  For use in 2-1/2" - 4" Conduit Size Manual Round Standard Knockout Punch Kit 7304. 2-1/2" Conduit Size (Hole size is 2-7/8") Standard Round Knockout Punch  ..
$71.71 $106.24
Greenlee 2" Conduit-Size Slug-Buster Knockout Punch Unit
Features: The contractor’s choice – worldwide. Unique punch profile splits slugs allowing easy slug removal. Use with battery-powered, hydraulic, ratchet or manual drivers. Uses standard Greenlee dies and draw studs. Slug Buster Punches available in sizes up thru 2.52" (64.0 mm). Capacity: Mild steel up through 10 gauge (3.5 mm). Application: Punch m..
$106.04 $157.10
Greenlee 20671 Punch Unit Round 1-1/8
Features: Round standard metal punch units are complete units consist of punch, die and draw stud Use with battery-powered, hydraulic, ratchet or manual drivers Properly assembled through pilot holes, they will make clean, fast and accurate holes Slug falls free in die Can be used on mild steel up to 10 gauge 1-1/8" ..
$41.59 $68.62
Greenlee 20673 Punch Unit Round 1.250 BB (730BB)
Features: Round standard metal punch units are complete units consist of punch, die and draw stud Use with battery-powered, hydraulic, ratchet or manual drivers Properly assembled through pilot holes, they will make clean, fast and accurate holes Slug falls free in die Can be used on mild steel up to 10 gauge ..
$67.06 $99.36
Greenlee 20678 2-1/8" Metal Knockout Punch Unit
Features: Round standard metal punch units are complete units consist of punch, die and draw stud Use with battery-powered, hydraulic, ratchet or manual drivers Properly assembled through pilot holes, they will make clean, fast and accurate holes Slug falls free in die Can be used on mild steel up to 10 gauge ..
$95.99 $155.60
Greenlee 2142 Storage Chest, 42-Inch By 20-Inch By 20-Inch
Description: Greenlee storage chests have recessed and concealed lock protectors for maximum security against drilling and cutting locks. (Model 1332 one lock protector only.) Enhanced lid bolster for added support and durability. Finger-groove lid handle for easy opening. Steel support arms to hold lid the in open position. Heavy-duty piano hinges with non-removable pin. Patented, ergonomical..
$356.26 $565.49
Greenlee 2448 Storage Chest, 48-Inch By 25-Inch By 24-Inch
This item includes shipping anywhere in the continental US.  Please note, this item is not available for overseas purchase.  If you would like to arrange for store pickup or alternate shipping please call us at 800-876-2325.    Description: Store your valuable tools, parts and accessories with confidence in these heavy-duty, secure Gang Boxes. Each tool box is equipped with ..
$402.39 $638.72
Greenlee 2472 Storage Chest, 72-Inch By 25-Inch By 24-Inch
This item includes shipping anywhere in the continental US.  Please note, this item is not available for overseas purchase.  If you would like to arrange for store pickup or alternate shipping please call us at 800-876-2325.    Description: Store your valuable tools, parts and accessories with confidence in these heavy-duty, secure Gang Boxes. Each tool box is equipped with ..
$623.32 $989.40
Greenlee 25342 Punch Unit Round 1.062 BB (730BB)
Features: Round standard metal punch units are complete units consist of punch, die and draw stud Use with battery-powered, hydraulic, ratchet or manual drivers Properly assembled through pilot holes, they will make clean, fast and accurate holes Slug falls free in die Can be used on mild steel up to 10 gauge ..
$43.98 $65.15
Greenlee 25344 Punch Unit Round 1.312 BB (730BB)
Features: Round standard metal punch units are complete units consist of punch, die and draw stud Use with battery-powered, hydraulic, ratchet or manual drivers Properly assembled through pilot holes, they will make clean, fast and accurate holes Slug falls free in die Can be used on mild steel up to 10 gauge ..
$40.24 $59.62
Greenlee 25349 Punch Unit Round 1.625 BB (730BB)
Features: Round standard metal punch units are complete units consist of punch, die and draw stud Use with battery-powered, hydraulic, ratchet or manual drivers Properly assembled through pilot holes, they will make clean, fast and accurate holes Slug falls free in die Can be used on mild steel up to 10 gauge ..
$77.11 $114.98
Greenlee 25350 Punch Unit Round 1.750 BB (730BB)
Features: Round standard metal punch units are complete units consist of punch, die and draw stud Use with battery-powered, hydraulic, ratchet or manual drivers Properly assembled through pilot holes, they will make clean, fast and accurate holes Slug falls free in die Can be used on mild steel up to 10 gauge ..
$83.75 $126.38
Greenlee 25351 Punch Unit Round 1.875 BB (730BB)
Features: Round standard metal punch units are complete units consist of punch, die and draw stud Use with battery-powered, hydraulic, ratchet or manual drivers Properly assembled through pilot holes, they will make clean, fast and accurate holes Slug falls free in die Can be used on mild steel up to 10 gauge ..
$91.28 $147.75
Greenlee 25428 Punch Unit Round 1.500 BB (730XBB)
Features: Round standard metal punch units are complete units consist of punch, die and draw stud Use with battery-powered, hydraulic, ratchet or manual drivers Properly assembled through pilot holes, they will make clean, fast and accurate holes Slug falls free in die Can be used on mild steel up to 10 gauge ..
$69.28 $102.63
Greenlee 3" Conduit Size Standard Round Knockout Punch
Features: This item is the punch only.  For use in 2-1/2" - 4" Conduit Size Manual Round Standard Knockout Punch Kit 7304. 3" Conduit Size (Hole size is 3-1/2") Standard Round Knockout Punch   ..
$99.25 $147.04
Greenlee 3" Conduit Size Standard Round Knockout Punch
Features: This item is the punch only.  For use in 2-1/2" - 4" Conduit Size Manual Round Standard Knockout Punch Kit 7304. 3" Conduit Size (Hole size is 3-1/2") Standard Round Knockout Punch   ..
$86.60 $128.29
Greenlee 37959 2200' Poly Line
Image may not represent actual product Ready-to-use, pre-punched hole in lid with resealable cap Use with power fishing systems directly from the container Resists tangling when dispensing Rot and mildew resistant Handy reusable plastic dispenser pail with handle keeps the line dry Use to pull rope through conduit Application : For Use To Pull Rope Through Cond..
$70.46 $89.47
Greenlee 435 3/16" Diameter 3000' Long Conduit Measuring Tape
  3/16" Diameter 3000' Long Conduit Measuring Tape Measuring tape that is designed for conduit measuring, but is not limited to that. Features: 130 Pound Breaking Strength Polyester Construction 3000' Long 3/16" Diameter Application : For Conduit Measurement Material : Waterproof Polyester Tensile Strength : 170.000 LB (756.000 KN) Averag..
$75.85 $96.31
Greenlee 4872 Flat Top Storage Box, 48-Inch By 72-Inch By 30-Inch
This item includes shipping anywhere in the continental US.  Please note, this item is not available for overseas purchase.  If you would like to arrange for store pickup or alternate shipping please call us at 800-876-2325.    Description: Greenlee's flat top storage boxes have a flat-top design provides more storage capacity for tall, bulky items, plus a large work surface..
$1,140.49 $1,810.30
Greenlee 539-100 Fish Tape
  Product Specifications: Fish Tapes: Type - Fish Tape w/Reel and Winder Case Construction - Plastic Reel Diameter - 12 in Tape Material - Multi-Strand Steel Tape End - Standard Tape Length - 100 ft Tape Size - 3/16in. Manufacturer Series - Flex-O-Twist ..
$113.68 $160.40
Greenlee 539-50 Fishtape
  Product Specifications: Fish Tapes: Type - Fish Tape w/Reel and Winder Case Construction - Plastic Reel Diameter - 12 in Tape Material - Multi-Strand Steel Tape End - Standard Tape Length - 50 ft Tape Size - 3/16in. Manufacturer Series - Flex-O-Twist ..
$74.56 $99.92
Greenlee 555C Pipe Bender
    Description: The optional PVC-coated Rigid conduit shoe group can be used on all 555 series benders The 555C Classic Series features simple relay controls for easy field repairs, and compact handle design to prevent interference with conduit when bending Accessory : 37279 40 MIL PVC Coated Rigid1/2 IN - 2 IN Shoe Group (Sold Separately) To Use With The 555..
$3,208.09 $4,666.31
Greenlee 5702 Phase Sequence Indicator
Features: Identifies L1, L2, L3 phases and indicates rotation of the motor before installation. Clockwise and counterclockwise indication via neon lamps. Live Phase Indicators: Three neon lamps  Motor rotation Indicators: Two neon lamps Measurement Category: Cat III, 600V ..
$146.40 $195.20
Greenlee 60070 DIE UNIT-RECT 1.81X3.62
  Replacement die for Rectangular Punch Unit 60068. ..
$777.14 $1,151.31
Greenlee 60110 Key Knockout Punch Unit (1.328" Hole Diameter)
Features: For use with any Greenlee Hydraulic Driver or Battery-Powered Driver Hole Size: 1.328"A x 0.102"B x 0.097"C Maximum Capacity: 14-Gauge Mild Steel Punch Unit Includes: Punch (# 60111) Die (# 60112) Draw Stud (# 60166) BB Drive Nut (# 60165) Counter Nut (# 60258) Minimum Pilot Hole: 0.875" For maximum draw stud life, Greenl..
$391.24 $579.62
Greenlee 60238 Oiltight Punch with Notches .875" Hole Size
Features: Hole size - .875" (22.5 mm) dia. Minimum pilot hole - .625" (15.9 mm) dia. Hand or hydraulic operation Maximum capacity - 14 gauge (2.0 mm) mild steel   Includes: 60239 Punch 60250 Die 60117 Draw Stud 60165 Ball Bearing Nut 60258 Counter Nut ..
$327.99 $485.91
Greenlee 60242 Oiltight Punch with Notches 1.210" Hole Size
Features: Hole sze - 1.210" (30.5 mm) dia. Minimum pilot hole - .625" (15.9 mm) dia. Hand or hydraulic operation Maximum capacity - 10 gauge (3.5 mm) mild steel   Includes: 60243 Punch 60249 Die 60117 Draw Stud 60165 Ball Bearing Nut 60258 Counter Nut ..
$350.02 $518.56
Greenlee 610-5 Piston for 1" Conduit - All Types (5 Pack)
  Greenlee 610-5 Specifications:  1" Conduit  Pistons per Pack 5   Greenlee 610-5 Features:  Use with blower or vacuum power fishing system to pioneer the line through the conduit run  Flexible foam body for an air-tight seal  Color-coded end disk with embossed size markings for fast, easy selection  Strong steel cente..
$28.35 $36.00
Greenlee 61086 'DD' Punch Assembly (.769 Diameter x .642 Flats)
Features: Maximum Capacity Mild Steel  14GA Mild Steel Operation Type: Hand/Hydraulic Double 'D' shaped Punch Optional adapter for hydraulic driver: 33967 (sold separately) Hole Size: 0.769" Diameter x 0.642" (19.5mm x 16.3mm) Minimum Pilot Hole: .500"  Capacity: 14 gauge mild steel   Includes:  Punch  ..
$260.32 $385.66
Greenlee 624 Set Screw Clamp Pulling Grips
Features: Pulling Grip w/Clevis Use to pull in 2" (50.8 mm) or larger conduit Type of pulls: heavy, long runs Type of grip: Flexible eye 1/4" (6.4 mm) diameter galvanized steel aircraft cable connected to 2 cable receptacles with 5/8" (15.9 mm) diameter opening and 2 clamping set screws Select pulling grips with a maximum rated capacity that meets or exceeds t..
$323.24 $410.46
Greenlee 629 Set Screw Clamp Pulling Grips
Features: Pulling Grip w/Clevis Use to pull in 2" (50.8 mm) or larger conduit Type of pulls: heavy, long runs Type of grip: Flexible eye 1/4" (6.4 mm) diameter galvanized steel aircraft cable connected to 2 cable receptacles with 5/8" (15.9 mm) diameter opening and 2 clamping set screws Select pulling grips with a maximum rated capacity that meets or exceeds t..
$468.00 $594.28
Greenlee 650 Hook Sheave, 4000-Pound Capacity, 6-Inch
Description: Greenlee's 4000-Pound capacity hook sheaves are 5-Inch (127 mm) wide aluminum alloy sheaves with self-lubricating bearings. Strong, welded steel frames. Forged steel closure-type hooks with 1-Inch (25.4 mm) opening. Select a sheave with a maximum rated capacity that meets or exceeds the cable puller's maximum pulling force.   Features: Strong, welded steel fr..
$124.98 $226.72
Greenlee 651 Hook Sheave 4000-Pound Capacity 12-Inch
Description: Greenlee's 4000-Pound capacity hook sheaves are 5-Inch (127 mm) wide aluminum alloy sheaves with self-lubricating bearings. Strong, welded steel frames. Forged steel closure-type hooks with 1-Inch (25.4 mm) opening. Select a sheave with a maximum rated capacity that meets or exceeds the cable puller's maximum pulling force.   Features: Strong, welded steel fr..
$179.90 $326.35
Greenlee 704 Manual Heavy Duty Cable Cutter 21"
Features: Strong, lightweight fiberglass handles. Adjustable pivot bolt provides for blade adjustment. Replaceable, forged, heat-treated, and precision ground blades. Made in USA. Length 21" (533 mm) Weight: 3.01 lbs. (1.37 kg) Capacity - Copper: Max Use 350 kcmil (MCM) (150 mm2) / Frequent Use 250 kcmil (MCM) (120 mm2) Capacity - Aluminum: Max Use 500 kcmil..
$146.98 $186.64
Greenlee 709 Metal Stud Punch, 7/8-Inch Diameter
Features: 7/8" Diameter Stud Punch. Punch up through 20 gauge (0.9 mm) steel studs in one stroke. Aluminum head provides strength with minimum weight, reducing operator fatigue.  Contoured handle design gives better operator leverage and makes it possible to punch in tight places.  Self-stripping design eliminates punch hang-ups. Automatically centers holes on standard studs.&nbs..
$269.16 $443.08
Greenlee 710 Metal Stud Punch, 1 11/32-Inch Diameter
Features: 1 11/32" Diameter Stud Punch. Punch up through 20 gauge (0.9 mm) steel studs in one stroke. Aluminum head provides strength with minimum weight, reducing operator fatigue.  Contoured handle design gives better operator leverage and makes it possible to punch in tight places.  Self-stripping design eliminates punch hang-ups. Automatically centers ..
$269.16 $443.08
Greenlee 718 Manual Heavy Duty Cable Cutter 18"
Features: Strong, lightweight fiberglass handles. Adjustable pivot bolt provides for blade adjustment. Replaceable, forged, heat-treated, and precision ground blades. Made in USA. Maximum Capacity - Copper: 350 kcmil (MCM) (150mm2) Frequent Use Capacity - Copper: 4/0 (95 mm2) Frequent Use Capacity - Aluminum: 350 kcmil (MCM) (150mm2) Length: 18" (457 mm) ..
$72.36 $91.89
Greenlee 720 Keyway Punch
Features: Eliminates time consuming hand sawing and filing when making keyways for push-button switches. Use as a nibbler to make wider or deeper keyways. Punches 1/8" (3.2 mm) or 3/16" (4.8 mm) keyways for 7/8" (22.5 mm) or 1-7/32" (30.5 mm) push-button holes. Capacity - 10 gauge (3.5 mm) mild steel. ..
$250.48 $371.08
Greenlee 721-1-1/2 Slug-Buster Knockout Replacement Punch
  Key Features The contractor's choice -worldwide Unique punch profile also splits slugs for easier slug removal Use with battery-powered, hydraulic, ratchet or manual drivers Can be used on mild steel up to 10 gauge Punch only, die and draw stud required for operation Application : For Slug-Buster Knockout Punches Capacity Mild Steel : 1..
$43.04 $63.76
Greenlee 721-2 Slug-Buster Knockout Replacement Punch
  Key Features The contractor's choice -worldwide Unique punch profile also splits slugs for easier slug removal Use with battery-powered, hydraulic, ratchet or manual drivers Can be used on mild steel up to 10 gauge Punch only, die and draw stud required for operation Application : For Slug-Buster Knockout Punches Capacity Mild Steel : 10 GA (3.50..
$54.39 $80.58
Greenlee 7235BB 1/2" -1-1/4" Conduit Size Slug-Buster KO Punch Kit
  Includes : (721-1/2) 1/2 IN Conduit SizePunch, (14722) 1/2 IN ConduitSize Die, (00042) Draw Stud-3/8 IN x 1-5/8 IN, (721-3/4) 3/4 IN Conduit Size Punch, (124AV) 3/4 IN Conduit Size Die, (721-1) 1 IN Conduit Size Punch,(126AV) 1 IN Conduit Size Die, (721-1-1/4) 1- Maximum Capacity : 10 GA Mild Steel Sub Brand : Slug-Buster Type : Knockout Weight : 2.700 LB (1.200 KG) ..
$153.65 $227.63
Greenlee 7304 Standard Round Manual Knockout Punch Kit
  Greenlee 7304 Includes: •  1429AV 2-1/2" Conduit Size Punch, Hole Size: 2-7/8" •  1430AV 2-1/2" Conduit Size Die, Hole Size: 2-7/8" •  1431AV 3" Conduit Size Punch, Hole Size: 3-1/2" •  1432AV 3" Conduit Size Die, Hole Size: 3-1/2" •  2982AV 3-1/2" Conduit Size Punch, Hole Size: 4" •  2981AV 3-1/2" Conduit Size Die, Hole Size: 4" •  2984AV 4" Condu..
$865.20 $1,281.77
Greenlee 7306SB 1/2"-2" SlugBuster Ram/ Hand Pump Hydraulic Drive Kit
  Greenlee 7306SB Includes: • Driver • Hand pump • Slug-Buster punches • Dies and draw studs for 1/2" through 2" conduit • Adapter • Spacers • Kwik-Stepper Step Bit • Plastic case • 1 each of the following: 721-1/2, 14722, 721-3/4, 124AV, 721-1, 126AV, 721-1-1/4, 128AV, 721-1-1/2, 440AV, 721-2, 442AV, 746, 2113AA, 1557AA, 1924AA, 1925AA, 1926AA, 3441..
$1,007.15 $1,657.86
Greenlee 730PBB-2-5/8 Standard Round Knockout Punch Unit, 2-5/8-Inch
Features: Round standard metal punch units are complete units consist of punch, die and draw stud Use with battery-powered, hydraulic, ratchet or manual drivers Properly assembled through pilot holes, they will make clean, fast and accurate holes Slug falls free in die Can be used on mild steel up to 10 gauge ..
$244.76 $362.61
Greenlee 737BB 1-1/2" -2" Mild Steel Conduit Round Knockout Punch Kit
  Application : For 1-1/2 IN - 2.000 IN Conduit Includes : Punch, Die, Draw Stud And Plastic Case Maximum Capacity : 10 GA Mild Steel Replacement Part : 439AV 1-1/2 IN Conduit Size Punch, 440AV 1-1/2 IN Conduit Size Die, 441AV 2.000 IN Conduit Size Punch, 442AV 2.000 IN Conduit Size Die, 304AVBB 3/4 IN X 2-15/16 IN Draw Stud, 32012 Plastic Case Type : Knockout, Standard..
$160.22 $237.37
Greenlee 759 Compact Ratchet Cable Cutter
Features: Simple, one-hand operation.  Compact - convenient for working in tight places and stores easily in tool pouches.  Single-speed ratchet mechanism.  Blade release allows blades to be opened in mid-cut.  Heavy-duty blades provide long life. Maximum Capacity - Copper: 500 kcmil (MCM) (240 mm2) Maximum Capacity - Aluminum: 750 kcmil (MCM) (40..
$238.64 $303.03
Greenlee 760 Compact Ratchet Cable Cutter
Features: Simple, one-hand operation.  Compact - convenient for working in tight places and stores easily in tool pouches.  Single-speed ratchet mechanism.  Blade release allows blades to be opened in mid-cut.  Heavy-duty blades provide long life. Maximum Capacity - Copper: 1000 kcmil (MCM) (500 mm2) Maximum Capacity - Aluminum: 1000 kcmil (MCM) (..
$278.86 $354.11
Greenlee 7646 Ram and Hand Pump Hydraulic Driver Kit
Features: Fast, easy and simple to operate. Compact design for field use on construction sites and maintenance jobs. Punches 10 times faster than wrench method. Will also drive 751 Cable Cutter head. Can be used with most standard round, Slug-Buster and Slug-Splitter punches (not 1/2", 9/16", 5/8"). Can be used with non-round punches (adapter may be requir..
$804.11 $1,323.64
Greenlee 767 Hydraulic Hand Pump
Features: Hydraulic Hand pump Fast, easy and simple to operate. Compact design makes this a perfect choice for use on construction sites and maintenance jobs. Will also drive 751 Cable Cutter head. ..
$397.60 $589.03
Greenlee 774 High Performance Ratchet Cable Cutters
Features: High Performance Ratchet Cable Cutters 750 MCM copper  795 MC aluminum  1-3/16" communications cable Length: 19-1/8" ..
$408.29 $518.46
Greenlee 776 High Performance ACSR Cable Cutter
Features: Patented blade mechanism opens the blades automatically Blades close quickly because of two speed mechanism 20" length makes this an ideal tool for easy storage in bin ACSR cable cutter cuts though a maximum 5/16" steel core diameter Fiberglass handles mean his tool is lightweight and easy to use Specifically cuts: All 336.4 and Smaller AC..
$462.05 $586.73
Greenlee 7804SB Quik Draw Punch Driver Kit
Features: Compact, lightweight design for portability and fast, easy one-person operation. Develops 8 tons of hydraulic force for easy punching, even in 10-gauge stainless steel, depending on individual punch capacities. Quick Draw is perfect for fast, straight-on front panel punching. Quick Draw Flex allows unlimited driver orientation to simplify access to work area. Can be used with non-..
$637.66 $1,049.65
Greenlee 7806SB Quik Draw Punch Driver Kit
Features: Compact, lightweight design for portability and fast, easy one-person operation. Develops 8 tons of hydraulic force for easy punching, even in 10-gauge stainless steel, depending on individual punch capacities. Quick Draw is perfect for fast, straight-on front panel punching. Quick Draw Flex allows unlimited driver orientation to simplify access to work area. Can be used with non-..
$817.85 $1,346.26
Greenlee 7904SB Quick Draw 90 Hydraulic Punch Driver
Features: Compact, lightweight design for portability and fast, easy one-person operation. Develops 8 tons of hydraulic force for easy punching, even in 10-gauge stainless steel, depending on individual punch capacities. Quick Draw is perfect for fast, straight-on front panel punching. Quick Draw 90's right angle driver head rotates over 180 degrees for maximum flexibility i..
$790.29 $1,300.89
Greenlee 7906SB Quick Draw 90 Hydraulic Punch Kit
Features: Compact, lightweight design for portability and fast, easy one-person operation. Develops 8 tons of hydraulic force for easy punching, even in 10-gauge stainless steel, depending on individual punch capacities. Quick Draw is perfect for fast, straight-on front panel punching. Quick Draw 90's right angle driver head rotates over 180 degrees for maximum flexibility in tight working a..
$995.25 $1,638.28
Greenlee 8018 Hook Sheave, 8000-Pound Capacity, 18-Inch
Description: Greenlee's 8000-Pound capacity hook sheaves are for use with UT8, UT5, 6001, UT4 and UT2 cable pullers. Strong, welded steel frames. Forged steel closure type hooks with 1-Inch (25.4 mm) opening. All three sheaves are aluminum alloy with self-lubricating bearings.   Features: For use with UT8, UT5, 6001, UT4 and UT2 cable pullers Strong, welded steel frames ..
$546.92 $771.69
Greenlee 849 1/2" - 2" Electric PVC Heater/Bender
Features: Easy to use: preheat for 10 minutes, insert PVC, rotate until pliable, remove and form bend.  Sturdy double wall metal with fiberglass insulation and reflective interior for fast, even heat. Full length door for easy PVC loading and removal. Other features include on/off switch, pilot light and carrying handle. Capacity: 1/2"- 2" PVC All Schedules Power Source: 120 VAC, 20 A..
$453.11 $639.32
Greenlee 860-1-1/2 PVC Heating Blanket, 1/2" - 1-1/2" Capacity
Features: Make bends, offsets or saddles in PVC fast and easy Controlled, even heating for uniform bending Heavy-duty cord and thermostat for long life Temperature over 300° F (149° C) Capacity: Up to 1-1/2" PVC, All Schedules Power Source: 120 VAC Size: 13" x 8-1/4" (330.2 x 209.6 mm) Weight: 1.7 lbs. (.8 kg) Wattage: 200 ..
$223.18 $283.39
Greenlee 860-3 PVC Heating Blanket, 2"-3" Capacity
Features: Make bends, offsets or saddles in PVC fast and easy Controlled, even heating for uniform bending Heavy-duty cord and thermostat for long life Temperature over 300° F (149° C) Capacity = 2 in [Min], 3 in [Max] Length = 30 in Width = 13 1/4 in Voltage = 120.00 VAC [Max] Applications = Plastic Power Source = Electric Type = Heat Spreade..
$532.58 $676.28
Showing 1 to 100 of 283 (3 Pages)