ICS

ICS 680ES-14 Gas Power Cutter

$1,983.00$2,110.00
  • Manufacturer: ICS
  • Model: 680ES-14
  • Availability: In Stock

Equipped with integrated water delivery system that continuously feeds water to the blade and built to meet the operation and flexibility demands of the general construction user, the 680ES stands alone in terms of reliability and value.  Easy to start with a new multifunction lever to control choke, run, and stop functions. The distinctive black powerhead houses specially designed carburetion and ignition systems that work together to ensure easy starting, cooler operation and dependable performance at just about any elevation.  Available with 12-inch (30 cm) and 14-inch (35 cm) guidebars and the entire line of FORCE3™ series diamond chain. With a quick switch of the guidebar, chain and drive sprocket, the new 680ES can operate PowerGrit Pipe Cutting chain (10” (25 cm) cutting depth), designed to cut ductile iron pipe.

Technical Specifications:

Bar Cutting Depth 14in /35cm

Powerhead Weight 21 lbs/9.6 kg

Engine Speed         11500 +/- 500 rpm (max)

Idling Speed                 2800-3200  rpm

Horsepower                 5 hp (3.7 kW) 

Engine Type                 2-stroke, single cylinder, air cooled

Displacement         4.7 cu inch (76.5 cc)

Powerhead Dimensions 18”L x 11.5” H x 10” W (46 cm x 29 cm x 25 cm)

Guaranteed Sound Power Level, Lwa (1) 117 dB(A): (Kwa = 3.0 dB(A))

Sound Pressure Level, at Operator’s Ear Lwa (1) 101.0 dB(A); (K = 2.0 dB(A))

Vibration, a hv, eq Concrete Cutting (2) 7.2 m/s2 (K=1.0 m/s2) Front Handle  8.5 m/s2 (K=1.0 m/s2) Rear Handle

Water Supply Requirement Minimum of 20 psi (1.4 bar)

Water Flow  Minimum:         2 gpm (8 lpm)

Fuel Mix Ratio 50:1 (2%) fuel-to-oil

Fuel Capacity 0.26 gal (0.88 liter)

(1) Measured in accordance with ANSI S12.51-2012/ISO3741:2010

(2) Measured in accordance with ISO5349-1:2001 and ISO22867:2011


Write a review

Note: HTML is not translated!
    Bad           Good